All Management Events
- Ravi Kant Kumar November 20, 2019
- Bennet Benny (B.Sc. Physics, second year) wins Sakura Internship Program-2019 at Japan Advanced Institute of Science and Technology (JAIST) November 5, 2019
Bennet Benny has been honoured with the opportunity to attend an internship under the supervision of Prof. Ryo Maezono at JAIST, Japan. Established in 1990, JAIST is one of the research-intensive institutes for post-graduate studies located in the centre of Ishikawa Science Park (ISP). The internship is funded by the Japan Science and Technology Agency (JST), a government funding agency.
Under the guidance of Prof. Ranjit Thapa, Bennet had applied for the internship in March. This internship begins on 16th December and will continue till 24th December,2019. Bennet will be given hands-on tutorial on electronic structure calculations using DFT and QMC computational methods on one of the supercomputers located at JAIST. He will be joined by five other students from Bandung Institute of Technology, Indonesia.
“I am very excited to be given this opportunity as it will provide me with excellent practical experience and ample exposure that will be helpful to build my career.”, says Bennet and further expresses his gratitude towards Prof. D Narayana Rao, Pro-Vice-Chancellor, SRM University AP, and Dr. Sabyasachi Mukhopadhyay, Assistant Professor, Department of Physics for their immense encouragement and guidance.
Continue reading → - Pro VC, Prof. D. Narayana Rao awarded with Fellowship of the Indian Science Congress October 26, 2019
Prof. D. Narayana Rao receives honoured for his outstanding contributions to Physical Sciences
Prof. D. Narayana Rao, Pro Vice Chancellor, SRM University-AP, Amaravati has been conferred with the Fellowship of the Indian Science Congress (FISC) for his outstanding contributions to Physical Sciences.
The Fellowship has been awarded to Prof. Rao by the Indian Science Congress Association at their Council Meeting held in Bangalore on 16th October 2019. The main objective of ISCA is to advance and promote the cause of Science in India, recognize and support excellence in scientific research, technologies and innovations. Prof. Rao’s outstanding achievements and sustainable significant contributions to sciences were recognised and honoured.
SRM University AP organized a felicitation ceremony for Prof. Rao on this occasion where he encouraged the professors to pursue research by stating its significance. The ceremony was chaired by Dr. D Gunasekaran (Registrar), Dr. B Sivakumar (Deputy Registrar), and Dr. Anil K Suresh (Associate Professor, Biotechnology) who congratulated Prof. Rao on his achievements along with the faculty and staff members of the university.
Continue reading → - Dr. Writoban Basu Ball October 14, 2019
- ECE department of SRMAP’s work around high
“application factor” of batteries October 10, 2019Dr Sujith Kalluri
“Research: The distance between an idea and its realisation,” said the powerhouse of 20th-century mass media, David Sarnoff. The present might be filled with ideas, but it’s only quality research that will take them to their logical conclusion in the future. At SRM University AP the focus on research is manifold. The University is forging stronger relationships with the industry to promote research that is high on application in the real world. It also strives to inculcate research bent of mind amongst students through their active involvement in projects.
Dr Sujith Kalluri, Assistant Professor, Department of Electronics and Communication Engineering at the University, is part of one such project. The Venus International Foundation – Young Scientist Award winner 2017 is part of six-faculty team that is working on interdisciplinary research on Battery Technology, from the science to project development. The project has already attracted industry interest and offers brilliant exposure to students involved. The passionate researcher talks about his project and other initiatives at the University.
Charged about the project
Dr Kalluri’s research interest lies in Rechargeable Batteries, and Electronic Testing and advanced diagnostics of Lithium-Ion Batteries. He is grateful for the support of the leadership at the university, which has resulted in SRM-Amaraja Center for Energy Storage devices. “Our key objectives include fast charging technology in Lithium-Ion Batteries which enables fast charging of Electric vehicles. We also aim at implementing the additive manufacturing technology in the large scale production of battery electrodes,” he says looking ahead.
Research with high “application factor.”
Dr Kalluri reveals that the project being conducted at the University hopes to inspire manufacturing of large production of battery electrodes so that the industry can easily meet the demand for the Lithium-Ion batteries. “The goal would be to reduce the charging times for our Smart Phones and Electric Vehicles. So the research has tangible implications for these industries. Another aspect is the concern about Lithium resource around the globe. So we have to look at alternatives that are competitive with Lithium-Ion batteries,” he says.
The merits of interdisciplinary research
One of the highlights of the research project at SRM University AP is its multidisciplinary nature. It involves six faculty members from different engineering backgrounds, Physics and Chemistry. Dr Kalluri asserts that the expertise they bring to the table creates an enriching environment for research. “The faculty pool and resources give us perspective and direction. India has set a goal of at least 20% electric vehicles by 2030, so that gave us the motivation. Amaraja Batteries Limited have visited us several times and offered positive response,” he speaks of the impact.
Student involvement in research
Dr Kalluri states that they are currently in the process of recruiting PhD scholars, researchers and technicians for the centre. They also have a plan to recruit undergraduate and postgraduate students for the project. “They will be involved in R&D while researchers and faculty members focus on product development. Thus they will get first-hand insights into how research is done as well as how a product is developed. We also have an Undergraduate Research Program where students complete projects under the guidance of faculty mentors,” he explains.
Research-driven University
The prototype of Electric Vehicle, Bio-Medical analysis of MRI scans, Centre of Excellence in VLSI Design; the list of research projects at the University is endless. Dr Kalluri reminds us that their mission is to conduct research that addresses societal problems locally and globally. “Amaravati is planned to be a Smart City. All smart cities have a Smart Pole, which is completely Wi-Fi enabled. Our EC department is involved in developing the project, and the prototype has already been shown to APCRDA Department,” he says enthusiastically.
It’s this zest for research, to meet the demands of the evolving world around us, and the strong backing from the university that is nurturing future researchers. Strong Active Learning program, weekend labs to offer students ample time and exposure, and guidance of faculty members like Dr Kalluri helps students imbibe research skills and drive that can shape the future.
Continue reading → - Next Tech Lab : A Mangrove Of Ideas October 10, 2019
How Next Tech Labs of SRM University is one of its kind across the entire country When as a student, you get an opportunity to listen to a world leader like the seventh Secretary-General of the United Nations, Kofi Annan, you listen. You take notes and hope the learning pays off at some point in your career. But two students from SRM University took things a step further, and it has resulted in the innovative, buzzing, Next Tech Lab.
As Anshuman Pandey and Aditthya Ramakrishnan did their internship at the MIT Media Lab, US, the multidisciplinary nature of research stood out. The inspiration came from a conversation with Kofi Annan about research brain-drain. The concept note that followed sowed the seeds for first of its kind, student-led lab that has won accolades for itself and its members.
Wide scope and growth of the student-led lab
Next Tech Lab came into being at SRM University (now SRM IST), Kattankulathur and has made its strong presence on the sprawling Amaravati campus too. What makes it unique that it is a complete student-led activity with no faculty in charge. However, the multidisciplinary lab has a board of advisors, including industry bigwigs and academics.
Where ideas create winners
Since its inception, Next Tech Lab has been a success story for student-led innovation. It has been behind prototyping of ideas that have been well received. Some of the work that has emanated from the lab has been published in renowned journals across the world. The work has made top intellectual minds sit up and take notice, offer guidance and mentorship.
The results have also been astounding for individual members and teams of students involved with Next Tech Lab. In the past four years, they have won prizes at around 20 top events, including highly followed hackathons. Earlier this year, Aakanksha Chouhan, 2nd Year CSE student and member of Minsky group at Next Tech Lab gave an invited talk at PyCon X Italia in Florence, Italy. She was the youngest invited and funded speaker at the International Conference on Python programming and its applications.
Innovation is the future of all industries, economies and thereby, the Nations and the world. Next Tech Lab, the only Indian organisation to win the QS Reimagine Education 2018 award, is paving the way for it with student-led innovations, one exciting idea and experiment at a time.
Continue reading → - “UNIVERSITY AS A ‘LIVING LABORATORY’ OF ENVIRONMENT SUSTAINABILITY, SOCIAL CHANGE AND REGIONAL GROWTH”. October 7, 2019
“We aim to be at the forefront, bridging the gap between research & policy to actual action & outcomes on the ground which benefit the common people particularly those most affected by the environmental degradation.”
Vice Chancellor Jamshed Bharucha
SRM AP’s social service initiatives, partnered infrastructure development and environment sustainability projects serve as a grassroots level engagement with communities in the surrounding clusters of villages – Saakhamuru, Thullur and Nelapadu to the north, Pedaparami and Kuragallu to the west, and Neerukonda and Nidamaru to its east.
Through the NSS wing SRM Andhra Pradesh delivers social programs to villages (Neerukonda and Kuragallu) and school adoptions (renovations and advisory) blood donation camps, first aid and cancer awareness, cleanliness drives, environment protection (substituting plastics with jute bags,) donations to temples and environment sustainable programs like the university’s 1-acre kitchen garden that grows vegetables as a co-op with local villagers. In partnership with communities SRM AP Amaravati invests in infrastructure projects – working with villagers to build link roads. On campus – mechanised plants and technologies enable the deployment of environment sustainability projects like organic waste management, water harvesting, power conservation units for lights, heating, and generators; sewage treatment plant (treated for gardening and cooling towers) and rooftop solar power generation.
As VC Dr. Bharucha explains it, these programs speak to the university’s broader vision on its role and responsibility to the community and to do so in a manner that is integrated with university academics and policy.
How important are sustainability and environmental issues and how can universities play a part and provide solutions?
Dr. Bharucha: The sustainability of our environment is a collective responsibility for all humans on this earth, for all governments, for all parents and of course for all educational institutions. There is a concept called the ‘tragedy of the commons’ where if each individual person or each family or each company or each nation only pursues their own narrow interests – nobody is looking out for their collective good. The environmental destruction, degradation, is a consequence of the tragedy of the commons where anyone can put pollutants into the atmosphere or into the water system believing that it somehow gets blown away, somehow gets washed away but the research now makes it clear that we all get affected by it. Our health is affected; our well-being is affected.
As an educational institution it is critical that we become models of using the latest scientific knowledge, social organisational policy-related knowledge and to leverage the passions that many of our students and faculty feel about the environmental issues to really set an example. Academia must integrate with real world initiatives – we aim to be a university united with its region in thought and action.
On our locational advantage versus being in an urban setting – working with the surroundings?
Dr. Bharucha: It is a dramatic advantage for us to be located where we are. We, as educators, often tell our students, ‘go outside your comfort zone, make the world a better place, tackle the world’s problems.” So as educational institution we are located in a place where we can actually make a difference as there is a lot work to be done here. Of course there is a lot work to be done everywhere but whether we are talking about clean water, or waste management or energy consumption or air pollution we are in an ideal place to be a living laboratory, to demonstrate how latest research and good organisation of people can create a model – of the university as custodian of key pillars of education, community responsibility, sustainable growth and progress for all. So what I’d like to see is that we start with our campus and consistently and rapidly increase the percentage of energy (that is renewable energy that does not put pollutant in the air). We will have 30% solar power which is a legal requirement but we will seek to go beyond that by integrating our scientific and engineering research on alternate forms of energy. We would like to see what could be done by way of biomass energy production – turn waste into energy. Even maybe turn plastics into energy and maybe untapped wind energy to harvest water, be mindful of the water table levels and to clean the canals and streets that immediately surround our campus, to recycle and eliminate use of plastic. Our aim is to get a campus that does these things and then expand our influence into our communities – street by street, house by house, block by block and eventually village by village.
Combine that with a policy institute that we are considering to create that brings together scholars, researchers, practitioners, and political leaders and activists that brings together their wisdom to devise innovative ways to come up with and look for successful existing models where we can succeed and work with local communities, community leaders, residents and the villagers to show how in fact this is beneficial to them and is not an elitist idea.
What are your thoughts on Self Help groups within the college, biodegradable recycling, working with farmers and teaching them about new technology and better methods of farming, water management, and garbage and waste disposals?
Dr. Bharucha: We have, in our main iconic building, a water management drainage system which is part of the architecture. Currently, the water is used to refresh the ground water and we need to take additional steps to store some of that water for the dry season to reduce the consumption of water that we receive from the municipal supply. We need to make sure that we monitor water quality. As of now, we have started testing it so on campus but we would like to extend that to the canal around our campus and make this information available to local communities and make them aware and understand the national/international standards are for drinking water so that we can reduce disease, particularly childhood diseases are results of and spread by water. So if we can take care of the quality of water, we can eliminate a lot of suffering, illnesses which all drags down the economy.
All of these are incredible ideas and I would like to thank the Hon’ble Member of Parliament, Ms. Meenakshi Lekhi to move forward on it. We would like to explore all of them and set us several committees that will bring together the expertise of our faculty and the passions of our students and then we can connect with the local communities, first with their leaders and also with other organisations which might be on the ground to see where we can make the most difference in any of these areas.
Our higher education institutions have been focussed on theoretical knowledge. It is much more difficult to actually work with cultural, linguistic issues, socio-economic issues in the community than it is to go out and spread the knowledge we have.
This is not something that universities know how to do well but they need to figure it out especially if they are to be potent engines of change for society and for policy.
What I hear from you is that you would like translate the philosophy of the university into a more a practical classroom model to a more practical hands-on experience. So are you planning to create a new classroom model where the students get enough practical experiences in addition to the theory and work with the surroundings?
Dr. Bharucha: The word practical has a lot of historical baggage so what I would say that we have been too theoretical, particularly in the Indian education system. We need to offer applications of it (the teachings imparted). Applications can occur at different levels. We can apply the scientific knowledge in the design of technology, the production of new product/system. One can also apply the knowledge in economics and social sciences, psychology and sociology to try to design organisations that do good community work.
Social entrepreneurship programs aimed at communities give students the opportunity to find where they fit along the spectrum from theoretical (pure sciences, curiosity-driven knowledge) to the practical, the day-to-day tangible, all of which are essential for a university.
- Navigating the unknown: Modern technology’s race to the future September 28, 2019
Tech Fest 2019 dives into the hot new trends in technology with a lineup of programs like coderace, roborace, 3D printing, IoT workshops, design bootcamps, gaming development, circuit debugging, and deep learning. We explored these technologies, the future and what it holds for humanity with some of the minds behind Techfest – Neelakantam Poorna Venkat, A. Rajesh R Athimoolam, Jaswitha Reddy Guntaka, Sreya Tatineni TP Rao, and Pavan Krishna.
How do you see the future changing with the advent of new technologies?
N. Poorna Venkat: Technology will play the most prominent role in the future with tools and resources that make critical information available at our fingertips. It is fair to say that the future will be totally driven by emerging technologies and hopefully used to solve people’s daily life issues.
A. Rajesh: The advent of new technologies and applications in medicine and communication is at the core. I believe implementation of user friendly technology will continue to shape the way we live.
Jaswitha Reddy Guntaka: On the positive side, more advanced quantum computing and better security for information on the web. On the negative side, a world with zero privacy, less security and AI controlling a major part of human life. I think the protection of web content and the information on it must be given absolute importance.
Sreya Tatineni: We are at a juncture in the history of the world where marvellous new technologies come up every other day changing the course of our lives. I look forward to the future where the reality is closer to our fantasies and imagination which is virtually like we see in sci-fi – automatic cars without drivers, Delhi to NY commute in 30 minutes, colonies elsewhere in the galaxy.
According to you, which technology will be the most important in the coming 5 years?
N. Poorna Venkat: Internet of Things (IoT ) will be the most important technology in five years. It helps us connect to every man made device.
A. Rajesh: According to me, Nanogenerator technology that converts mechanical energy to electrical energy and wirelessly transfers energy to a nearby battery. Scientists from Clemson University have developed a new triboelectric nanogenerator that can generate 2000 volts of energy and transfer it wirelessly.
Pavan Krishna: Sustainable technology will be very important. We should contribute more towards natural environments rather than the technology of artificial holograms, as an example.
Which is the one thing that needs to be changed with the help of technology?
N. Poorna Venkat: Technology should be able to solve daily problems, mainly for farmers. For example, in India the weather forecast technology has to be improved.
A. Rajesh: The future use of drones in healthcare is very thought provoking. How can the industry best use this technology to improve safety and care delivery? For example, through a startup called Matternet. drones have been trained to deliver food aid and medical supplies to areas hit by disasters such as Haiti. But, while drone delivery makes it possible to courier needed vaccines to remote areas in harsh weather, it isn’t without challenges. Both blood and vaccines must be kept at a certain temperature during transport or they will be unusable when they arrive. Anyone working with the payloads must be properly trained to ensure the products arrive at the right temperature and that deliveries go smoothly.
Jaswitha Reddy Guntaka: I think climate change is an issue we can confront with the help of technology – Using simulations to show people what our world can change into in the next 50-100 years might change their perception.
Sreya Tatineni: How great would it be if there is a technology that helps us with the biggest challenge we face today namely law and order? A technology that enables faster solutions to the institutions around the world that fight crime in all forms.
Pavan Krishna: There are many things that have the scope to change with the help of technology because it all depends on that one moment where an idea culminates and transitions into implementation using existing technology, science and knowledge. If I have to be specific, I’d say converting food wastage – it should go into machines either as fuel or it should produce useful products. The machines I refer to should shrink in cost, size and effect to such an extent one can have it safely in the house
Which is your dream technology? Given a chance, which technology will you be looking forward to developing? why and how?
N. Poorna Venkat: My dream technology is one that helps farmers. We need to develop higher yield seeds or breeds that can grow in all weather conditions. This is possible only through modern technology.
A. Rajesh: I foresee a technology that can quantify the ‘feelings’ of people. Other than that, technological developments in healthcare have already saved countless lives and are regularly improving our quality of life.
Sreya Tatineni: Personally, my idea of a dream technology is the one that makes possible flying cars. It would avoid a lot of traffic congestion across the world and also prevent traffic-related catastrophes. How cool would it be to see cars flying across high-rise buildings and landing at any floor of the building as per our convenience?
Pavan Krishna: My dream technology would be Smart Vehicles which can be self-driven, traffic-adaptable (it should analyze the traffic and switch to different modes), its fuel consumption should be environmental friendly and get automatically refilled by different sources of energy?
Which technology intrigues you the most?
N. Poorna Venkat: The new technology that intrigues me is IoT, and how it can be implemented in the agricultural sector.
A. Rajesh: Voice Interface Technology intrigues me the most because voice recognition is changing the user experience and how we operate our daily lives. For example, I use Google Home every waking hour. That is what the power of a new and drastic shift in user interface and user experience can do to help users complete the simplest tasks.
Jaswitha Reddy Guntaka: The technology that intrigues me the most is AR/VR. Although I am not interested in developing it I love playing with it. I currently play Sims 4, a simulation video game.
Sreya Tatineni: As of now, it would be IoT, interrelating a variety of computing devices to transfer data across machines and living beings.
Which is your favorite book/article on technology?
N. Poorna Venkat: I basically read books related to social studies. My favorite is ‘Politics after Independence in India’. I have never actually read a book related to technology.
A. Rajesh: ‘What Technology Wants’ by Kevin Kelly is my favorite book on technology. Its focuses on human-technology relations and argues for technology as the emerging seventh kingdom of life on earth!
Jaswitha Reddy Guntaka: My favorite book on technology would be ‘Digital Fortress.’ If given a chance, I hope to develop a machine similar to the TRANSLTR.
Sreya Tatineni: One of the best ways of understanding the effect of technology on human lives is the book I read recently called “Hit Refresh” by Satya Nadella where he beautifully explains the effect of our unique human quality – empathy – in determining the course of technological advancement and its impact in changing the status quo.
Pavan Krishna: The article I can never forget is on the success of ‘Mission Mangalyaan’ where I realized that all technological advancements need not be costly and knowledge is truly timeless.
Who is the most influential person in the universe of technology and why do you think so?
N. Poorna Venkat: Dr. APJ Abdul Kalam because his hard work towards achieving his goals inspires me a lot.
A. Rajesh: John Giannandrea is the most influential person in technology. As Google’s head of search, Giannandrea is at the heart of the company’s most important business and the world’s most popular website. He’s also an artificial intelligence expert who runs Google’s A.I. efforts. His current position puts him at the juncture of search and A.I., a critical nexus for Google as it prepares for a future dominated by digital assistant software like the Google Assistant and voice-powered hardware like the Google Home rather than text-based queries.
Jaswitha Reddy Guntaka: There are many influential people in this domain of technology and Elon Musk is one of those people with whom I see eye to eye, on a few of his ideas.
Pavan Krishna: The most influential person in technology is Elon Musk because he’s trying to explore everything that is available and possible in this universe – automobiles with Tesla, transportation with Hyperloop, space with ScapeX, Banking with Paypal and many more. The interesting fact to consider is that all his ideas are towards sustainable technologies.
Continue reading → - IEEE Membership Brings Worldwide Networking Opportunities September 27, 2019
IEEE (Institute of Electrical and Electronics Engineers) with over 120,000 student members is the world’s largest technical professional organization dedicated to advancing technology for the benefit of society. It does so through its highly-cited publications, conferences, technology standards, professional and educational activities.
SRM AP became a member of the IEEE in November 2018 and has 500 student members already.
Agniswar Paul, chair of IEEE SRM AP student branch says, “We will be looking to offer our members numerous professional advantages over and above the curriculum and academic experience. These could be participation at regional conferences, workshops, competitions like student paper contests and even scholarships. Also, opportunities in project/design programs.”
A vast network of member organisations helps create many of these opportunities. IEEE has more than 417000 members in more than 160 countries, more than half of them outside the United States. Student members begin by connecting with local communities active in research and authorship and engaged in important conversations on current and relevant technical topics. Georgy Jose, a student of Chengannur College of Engineering won the third prize from the IEEE Coding Competition, later bagging a placement in an American multinational IT company UST GLOBAL.
“All SRM AP members of the IEEE will gain ample exposure, enough to work on Research Papers and get published in world-class journals. Students will also be mentored to work on ideas perfected by thousands of academicians across the globe. They will also get a chance to attend conferences of their choice in any part of the world depending on their experiences and academic track record”, says Agniswar.
The IEEE Chapter at SRM AP kick-started this semester with a promotional event “GAME OF CLUES” on August 21st.
Continue reading → - Advanced materials is a truly cross-cutting technology for all defence systems.” Dr. Samir Kamat, DRDO September 26, 2019
20th September 2019: Dr. Samir V. Kamat, Director General, DRDO, New Delhi, delivered a University Distinguished Lecture on “Advanced Materials for future Defense Systems: A DRDO Perspective” for students, faculty members and research scholars. He began with a brief overview on the functioning of various DRDO labs around our country, activities and achievements in aeronautics, missile system, hypersonic, weapons, armour, naval and life support systems. He also spoke of current and future challenges inviting bright young minds at the university to take part in shaping the future.
As to advanced materials that DRDO looking for, Dr. Kamat spoke of high strength and self-healing composites, higher temperature and corrosion resistance materials for aeronautical & naval structures and light weight armour materials.
According to Dr. Kamat, advances in materials are fundamental enablers for defence system capabilities and to meet the needs of the sector. He pointed to new areas of focus such as computational materials & materials genome and additive manufacturing which he described as a future game changer in the field of materials.
Presentations were also delivered by faculty members, Dr. Sabyasachi Mukhopdaya, Dr. G. S. Vinod Kumar, Prof. Ranjit Thapa, who had presented their group works on Materials Science and Engineering, Computational materials and Centre for Materials Genome. Dr. Samir Kamat encouraged SRM-AP to move forward to establish in collaboration with DRDO a Centre for Additive Manufacturing and Centre for Materials Genome.
Dr. Samir V. Kamat received his B.Tech (Honours) in Metallurgical Engineering from IIT Kharagpur in 1985 and Ph.D from Ohio State University in 1988. He is currently the Director General, Naval Systems and Materials, Defence Research and Development Organization (DRDO). He has also served as a Scientist and Director at Defence Metallurgical Research Laboratory, Hyderabad where he worked on the development of various advanced materials for defence applications. He has published more than 185 papers in peer reviewed International Journals and has received several DRDO and National Level Awards. He is a Fellow of Indian Academy of Engineering (INAE) and Institution of Engineers, India (IEI)
Continue reading →