Assistant Professor

Dr Lakshmi Sirisha Maganti

Department of Mechanical Engineering

Interests

  1. Thermo-Fluid
  2. Microfluidics
  3. CFD

Education

2008

Acharya Nagarjuna University
India
Bachelors

2012

Anna University
India
Masters

2017

Indian Institute of Technology Madras
India
PhD

Experience

  • June 2019 to Till date, Assistant Professor | SRM University-AP
  • July 2018 to May 2019, Adhoc Faculty | National Institute of Technology A.P.
  • September 2017 to March 2018, Post Doc Fellow | State University of New York Binghamton, USA.
  • April 2017 to September 2017, Pre-Doctoral Fellow | Indian Institute of Technology Madras, Chennai.
  • June 2012 to June 2013, Assistant Professor | S K R Engineering College, Chennai.
  • August 2008 to March 2009, Lecturer | Bapatla Engineering College, Bapatla.

Research Interest

  • Developing an effective cooling system to address the cooling challenges of electronic components using parallel microchannels based heat sinks.
  • Implementing simple technics such as altering surface mechanisms like surface tension of the fluid, to improve the hydrodynamic performance of heat sinks.
  • Exploring different diverse areas like miniaturization of R&AC systems and application of graphene sheets in desalination of water e.t.c.

Awards & Fellowships

  • 2012, University Gold Medal in M.E., Anna University, Chennai
  • 2017, Pre Doctoral Fellowship, Indian Institute of Technology Madras, Chennai

Publications

All publications:

1. Particle and Thermo-Hydraulic Maldistribution of Nanofluids In Parallel Microchannels - S. Maganti, P. Dhar, T. Sundararajan and S. K. Das- Microfluidics and Nanofluidics, 20 (7), 109 (2016).

2. Thermally Smart Characteristics of Nanofluids in Parallel Microchannel Systems for Mitigating Hot-spots in MEMS - S. Maganti, P. Dhar, T. Sundararajan and S. K. Das-IEEE Trans. Components, Packaging and Manufacturing Technology, 6 (12), 1834 – 1846 (2016)

3. Smart Viscoelastic and Self-Healing Characteristics of Graphene Nano-gels- P. Dhar, A. Katiyar and S. Maganti- Journal of Applied Physics, 120, 214304 (2016)

4. Superior Dielectric Breakdown Strength of Graphene and CNT Infused Nano-Oils- P. Dhar, A. Katiyar, S. Maganti, A Pattamatta And S. K. Das- IEEE Trans. Dielectrics and Electric Insulation, 23 (2), 943-956 (2016)

5. Enhanced Dielectric Breakdown Performance of Anatase and Rutile Titania Based Nano-Oils- A. Katiyar, P. Dhar, T. Nandi, S. Maganti and S. K. Das- IEEE Trans. Dielectrics and Electric Insulation, 23 (2), 943-956 (2016)

6. Heat spreader with parallel microchannel configurations for near-active cooling of MEMS- S. Maganti, P. Dhar, T. Sundararajan and S. K. Das- International Journal of Heat and Mass Transfer, 111, 570-581 (2017).

7. Selecting optimal parallel microchannel configuration(s) for active hot spot mitigation of realistic multicore microprocessors- S. Maganti, P. Dhar, T. Sundararajan and S. K. Das- Transactions of the ASME Journal of Heat Transfer, 139 (10), 102401 (2017).

8. Consequences of flow configuration and nanofluid transport on entropy generation in parallel microchannel cooling systems- S. Maganti, P. Dhar- International Journal of Heat and Mass Transfer, 109, 555–563 (2017).

9. Predicting Thermal History a Prior for Magnetic Nanoparticle Hyperthermia of Internal Carcinoma- Dhar and L. S. Maganti- Journal of Applied Physics, 122 (5), 054902 (2017).

10. Mitigating Non Uniform Heat Generation Induced Hot Spot (S) in Multicore Processors Using Nanofluids in Parallel Microchannels- S. Maganti, P. Dhar, T. Sundararajan and S. K. Das- International Journal of Thermal Sciences, 125, 185-196 (2018).

11. Electrohydrodynamic fibrillation governed enhanced thermal transport in dielectric colloids under field stimulus- Dhar, L. S. Maganti and A. R. Harikrishnan- Soft Matter, 14(21), 4278-4286 (2018).

12. Amplifying thermal conduction calibre of dielectric nano-colloids employing induced electrophoresis- Dhar, L. S. Maganti and A. R. Harikrishnan and C. Rajput- Experimental Thermal and Fluid Science, 106, 138-147 (2019).

13. Influence of competitive electro- and ferro-hydrodynamics on droplet vaporization phenomenology- Purbarun Dhar, Vivek Jaiswal, Hanumant Chate & Lakshmi Sirisha Maganti- Microfluidics and Nanofluids, (2022).

14. Shanmugam, M., & Maganti, L. S. (2023). Improvement of uniformity of irradiance on truncated compound parabolic concentrator by introducing the homogenizer ratio. Renewable Energy, 204, 580-592.

15. Shanmugam, M., & Maganti, L. S. (2023). Multi-objective optimization of parallel microchannel heat sink with inlet/outlet U, I, Z type manifold configuration by RSM and NSGA-II. International Journal of Heat and Mass Transfer, 201, 123641

16. Shanmugam, M., & Maganti, L. S. (2023). Evaluation of Heat Flux Distribution on Flat Plate Compound Parabolic Concentrator With Different Geometric Indices. Journal of Solar Energy Engineering, 145(5), 051007.

17. Shanmugam, M., Maganti, L. S. (2023).. Efficacy of parallel microchannel configurations towards hot-spot thermal management of 8-core microprocessors. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

All conference Publications:

18. Flow and Concentration Maldistribution of Nanofluid In Parallel Microchannels- S. Maganti, T. Sundararajan and S.K. Das, Proceedings of The 1st International And 23rdNational ISHMT-ASTFE Heat And Mass Transfer Conference, Trivandrum, India (2015).

19. Thermal Performance Of Nanofluids In Parallel Microchannel Systems – U,I,Z- S. Maganti, T. Sundararajan and S. K. Das, 3rd International Conference On Nanotechnology For Better Living, Srinagar, India, , May (2016).

20. Identifying the geometrical parameters governing fluid maldistribution in microscale flow distribution systems- V. Jaisawal, S. Maganti and P. Dhar, International Conference on Fluid Mechanics and Fluid Power (FMFP), NIT Allahabad, Allahabad (2016).

21. S. Maganti, T. Sundararajan and S. K. Das, Mitigation of non-uniform hot spots in Intel i7 processor using microchannels and nanofluids, International Conference on Fluid Mechanics and Fluid Power (FMFP), NIT Allahabad, Allahabad (2016).

22. Shanmugam, M., & Maganti, L. S. (2022, December). Evaluation of Heat Flux Distribution Characteristics of a Concentrated Solar Dish Collector with different geometric indices. In IOP Conference Series: Earth and Environmental Science (Vol. 1100, No. 1, p. 012001). IOP Publishing.

23. Mathiyazhagan, S., & Maganti, L. S. (2022, February). Thermal management of multi-core processor using U Configured parallel microchannel cooling system. In Journal of Physics: Conference Series (Vol. 2178, No. 1, p. 012006). IOP Publishing.

24. Mathiyazhagan, S., & Maganti, L. S. (2022). Validating Analytical and Numerical Predictions of Hydrodynamic Characteristics in Microchannel with Experimental Results. In Technology Innovation in Mechanical Engineering: Select Proceedings of TIME 2021 (pp. 335-343). Singapore: Springer Nature Singapore.

Patents:

Patent 1:
Title: A SYSTEM AND METHOD FOR COOLING A HOT-SPOT DETECTED IN A MICROPROCESSOR
Status: Filed
Application Number: 201811042884
Patent Authority: Intellectual Property of India.

Patent 2:
Title:A SYSTEM AND METHOD FOR GEOMETRICAL OPTIMISATIONS OF A COMPOUND PARABOLIC CONCENTRATOR
Application No: 202341030390 A
Date of filing: 27/04/2023
Publication date:05/05/2023
Name of applicant: Mathiyazhagan S, Lakshmi Sirisha Maganti

Patent 3:
Design Patent
Title: HEATER ARRAY UNIT
Application No: 387672-001
Date of filing: 05/06/2023
Class: 13-03
Status: Reviews have been submitted to examiner
Name of applicant: Mathiyazhagan S, Lakshmi Sirisha Maganti

Patent 4:
Title: THE METHOD TO TEST LIQUID COLD PLATES USING HOTSPOT HEAT FLUX SIMULATOR
Application No: 202341071069
Date of filing: 18.10.2023
Name of applicant: Mathiyazhagan S, Lakshmi Sirisha Maganti

Funded Project:
Design and development of “smart” and “hybrid” parallel microchannel cooling system to address the cooling challenges of electronic components, Total Budget : 28,97,400 INR, Duration: Jan 2022 to Jan 2023

Contact Details

TOP