Book Chapters

1 K. K Panchagnula and J. S. Panchagnula , "Advances in Additive Manufacturing and Joining (Chapter 5)" Published by Springer. Year 2020

International Journals

1 Rabey, P. K., Jammy, S. P., Bruce, P. J. K., & Sandham, N. D. “Two-dimensional unsteadiness map of oblique shock wave/boundary layer interaction with sidewalls” Journal of Fluid Mechanics, (2019) 871, R4. Impact Factor: 2.89.

2 Mudalige, G. R., Reguly, I. Z., Jammy, S. P., Jacobs, C. T., Giles, M. B., & Sandham, N. D. “Large-scale performance of a DSL-based multi-block structured-mesh application for Direct Numerical Simulation” Journal of Parallel and Distributed Computing, (2019) 131, 130–146. Impact Factor: 2.52.

3 Halkarni S. S, Sridharan A., Prabhu S. V., “Local wall heat transfer coefficient measurement in a packed bed of cylinders using infrared (IR) thermography technique and application of random packing of cylindrical particles inside concentric tube heat exchangers with water as working medium,'' Heat and Mass Transfer Journal, (2019) 55, 2305 -2328. (Impact Factor: 1.6; H-index: 58);

4 Santhan, R., Manish Kumar, Jayaprakash, S. P., Pradeep K. P., S. Surya Kumar, Kazuhiro Ito, Sharma, A., “A new approach for attaining uniform properties in build direction in additive manufactured components through coupled thermal-hardness model”, Journal of Manufacturing Processes, (2019) 40, 46-58. Impact Factor: 3.6

5 Joy, Jil, Mahesh Jadhav, Disna Sahane, Deepak Davis, and Sheela Singh. "Elemental effect on formation of solid solution phase in CoCrFeNiX and CoCuFeNiX (X= Ti, Zn, Si, Al) high entropy alloys." Materials Science and Technology (2019) DOI: 10.1080/02670836.2019.1639888 Impact Factor: 1.93

6 Davis, Deepak, A. Farhaan Shah, Bharat B. Panigrahi, and Sheela Singh. "Effect of Cr2AlC nanolamella addition on tribological properties of 5W-30 engine oil." Applied Surface Science, (2019) 493 1098–1105, Impact Factor: 6.182

7 Ravikiran Jondhale, Surfarazhussain S. Halkarni, N. R. Raykar, Arunkumar Sridharan and S. V. Prabhu, “Influence of converging and diverging geometry on the pressure drop distribution in randomly packed beds”, Journal of Particulate Science & Technology, Taylor and Francis, (Impact Factor: 1.42; Accepted 19 - Feb - 2020: Article in press) (Status Corresponding author) (Impact factor: 0.51; H-index: 30);

8 K. M. Saradesh, G.S. Vinod Kumar, “Grain refinement of 24 karat gold (99.99 wt.% pure) and 22 karat gold (Au-5.8wt.%Cu-2.5wt.%Ag) by Au-6wt.%Ti grain refiner”, Gold Bulletin, (2020) Impact Factor: 2.279 (Status Corresponding author)

9 K.M. Saradesh, G. S. Vinod Kumar, “Metallurgical processes for hardening of 22Karat Gold for lightweight and high strength jewelry”, Journal of Materials Research & Technology, (2019), Impact Factor: 3.327 (Status Corresponding author)

10 S. Sasikumar, Georgy Kurian, M. Mukherjee, G. S. Vinod Kumar, “Foam stabilization by Aluminium Powders”, Materials Letters 262, 127142 (2019) Impact Factor: 3.019 (Status Corresponding author)

11 K. M. Saradesh, Indrajit Patil, D. Sivaprahasam, Bhalchandra Kakade, G. S. Vinodkumar, “Study on the electrochemical behaviour of 22k gold (Au-5.8wt.%Cu-2.5wt.%Ag) and Ti containing 22k gold (Au-5.8wt.%Cu-2.0wt.%Ag-0.5wt.%Ti)”, Gold Bulletin, 52, 175-183. (2019) Impact Factor: 2.279 (Status Corresponding author)

12 Sean d’Brass, K. R. Ravi, J. Nampoothari, K. M. Saradesh, T. Rajasekaran, G. S. Vinod-Kumar, “The Effect of Melt Ultrasound Treatment on the Microstructure and Age Hardenability of Al-4 Wt. Pct Cu/TiC Composite”, Metallurgical and Materials Transactions B, 50, 2557-2565 (2019) Impact Factor: 1.952 (Status Corresponding author)

13 Prakash Jadhav, Innovative designs of embedded foam insert in the aerospace composite material, Material Today Proceeding, 2020, 21 1464-68

14 P. Jayaprakash Sharma, Influence of Various Tool Path Patterns on Hardness Used in Weld Deposition-Based Additive Manufacturing, Advances in additive manufacturing and joining, Oct 2019, pp 61-73

15 K K Panchagnula and J S Panchagnula “Fabrication of hoop-wound glass fiber reinforced plastic cylindrical shells using filament winding machine” Materials Today Proceedings, 2020 (available online) , in press,

16 Prakash Jadhav, “Effect of ply drop in aerospace composite structure”, Key Engineering Materials, 2020, vol 847, pp 46-51.

17 Davis, Deepak, Gobinath Marappan, Yuvaraj Sivalingam, Bharat B. Panigrahi, and Sheela Singh. "Tribological Behavior of NiMoAl-Based Self-Lubricating Composites." ACS Omega, 2020, 5, 24, 14669–14678. Impact Factor:: 2.870 (Status : Corresponding author)

18 Deepak Davis, Sheela Singh, R.P.S Chakradhar, and Meenu Srivastava, “Tribo-Mechanical Properties of HVOF Sprayed NiMoAl-Cr2AlC Composite Coatings.” Journal of Thermal Spray Technology, Accepted Impact Factor:: 2.522 (Status : Corresponding author)

19 Davis, Deepak, Sheela Singh, and Meenu Srivastava. "Influence of solid lubricants addition on the tribological properties of HVOF sprayed NiMoAl coating from 30° C to 400° C." Materials Letters 266 (2020): 127494. Impact factor: 3.204 (Status : Corresponding author)

20 Shailendra Kumar, Vinayak Kulkarni, Jammy S. P., "Aerothermodynamic Assessment of Spiked Configuration for Drag Reduction at Hypersonic Speeds", Journal of Aerospace Engineering 33(6), (2020)

21 Hamid Ebrahimi Orimi, Sivakumar Narayanswamy, Christos Boutopoulos, "Hybrid analytical/numerical modeling of nanosecond laser-induced micro-jets generated by liquid confining devices", Journal of Fluids and Structures (Impact Factor 3.07) In Press

22 Hamid Ebrahimi Orimi,Sayadeh Sara Hosseini Kolkooh, Erika Hooker, Sivakumar Narayanswamy , Bruno Larrivée, Christos Boutopoulos,” Drop-on-demand cell bioprinting via Laser Induced Side Transfer (LIST)", Scientific Reports 10, 9730 (2020). (Impact Factor 4.011) Published online

23 Prakash Jadhav and Febin Cyriac “Structural damage assessment using a transmissibility based quantitative parameter” Vibroengineering PROCEDIA, Vol. 34, 7-13 2020, (impact factor 0.28)

24 Prakash Jadhav “Vibration technique for monitoring termite induced degradation in trees” Vibroengineering PROCEDIA, Vol. 34, 55-60 , 2020 (impact factor 0.28 )

25 Mahesh Jadhav, Disna Sahane, Amit Verma, Sheela Singh "Thermal stability and thermal expansion behavior of FeCoCrNi2Al high entropy alloy” Advanced Powder Technology, 2020 (in Press)

26 Disna Sahane, Sheela Singh, Mahesh Jadhav, Bharat B. Panigrahi “ Isothermal and Non-isothermal Sintering Characteristics of Mechanically Alloyed Nonequiatomic Fe2CoCrMnNi High Entropy Alloy Powder” Powder Metallurgy 2020 (In Press)

27 Dipak Bhosale, Akshay Devikar, S. Sasikumar, G. S. Vinod Kumar “Foaming Mg alloy and composite using MgCO3 blowing agent” Metallurgical and Materials Transaction B (10.1007/s11663-021-02066-0) published online 16-02-2021. Impact factor 2.18

Conference Papers

1 V. Nori, R. V. S. Krishna Dutt and N. S. Murty , Model based quantitative diagnostics of power plant condenser , IHMTC2019-HTQ-288, Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (2019)

2 P. Jadhav, Innovative designs of embedded foam inserts in aerospace composite structures, Proceedings of International Conference on Recent Trends in Composite Materials, Feb 2019, IIT BHU

3 P. Jadhav, Bridging the gap between industry and institutes for better society, International Conference of Transformation in Engineering Education, July 2018, SRM University, AP

4 Kishore, P.K, Jayaprakash, S. P., “A preliminary Study on the effect of various tool paths patterns in Weld-Deposition based Additive Manufacturing” 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018). Held on 13-15 December 2018, Anna University, Chennai, India.

5 Jubajyothi, C., Vinayak, K., & Jammy, S. P. (2018). “Viscous Compressible Flow Solver for Multiple Architectures”, FMFP IIT Bombay

6 Mangalagiri, R., Thapa, S. B., & Jammy, S. P. OpenSBLIFVM : An automatic code generation framework for Finite volume methods on CPU’s and GPU’s. 8th International and 47th National conference on Fluid Mechanics and Fluid Power (FMFP), December 2020

7 G Kalyan Deepak, Sujan, B. T., Mangalagiri, R., & Jammy Satya P. (2020). Performance of various shock capturing schemes on CPU’s and GPU’s 8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 2020.

8 Neel Gandhi, Garlapati Nagababu and Vistapalli Janardhan, “Modeling and Kinematic Analysis of a Robotic Manipulator for Street Cleaning Applications Using Screw Theory “, International Conference on Industrial Problems on Machines and Mechanisms (IPRoMM-2020), BITS-Pilani, Hyderabad campus.

9 S Kumar, J Patel, V Kulkarni, S.P. Jammy, “Real gas effects ON DRAG REDUCTION FOR SPIKES OF DIFFERENT GEOMETRY” Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), DOI: 10.1615/IHMTC-2019.1380, pages 823-828.

10 Prakash Jadhav, Passive morphing in composite structures, Paper presented in International Conference on composite materials and materials engineering, Thailand, Jan 24-26, 2021