JOURNALS

• D. Jatain, M. K. Singha, A. Agarwal, M. Taleja “FEM based optimization of thin membrane for thermoelectric energy harvesting devices” Sensors and Transducers , Vol.147, No. 12, Dec 2012, pp. 68-77
• L. L. Rajeswara Rao, M. K. Singha, K. M. Subramaniam, N. Jampana, and S. Asokan “Molybdenum Microheaters for MEMS-Based Gas Sensor Applications: Fabrication, ElectroThermo-Mechanical and Response Characterization”,IEEE SENSORS JOURNAL. Vol.17, No 1, 2017, pp: 22-29.
• V. Rojwal, M. K. Singha, T. K. Mondal, D. Mondal “Formation of micro structured doped and undoped hydrogenated silicon thin films” Superlattices and microstructures, Vol.124, Dec 2018, pp.201-217
• S. Rahaman, M. A. Sunil, M. K. Singha* and K. Ghosh “Temperature dependent growth of Cu2SnS3 thin films using Ultrasonic Spray Pyrolysis for solar cell absorber layer and photocatalytic application”, Materials Research Express, Vol. 6, 106417. 2019 (corresponding Author)
• M A Khan, M. K. Singha, K K Nanda, S B krupanidhi, “Defect and Strain Modulated Highly Efficient ZnO UV Detector: Temperature and Low Pressure Dependent Studies”, Applied Surface Science, Vol 505, March 2020, 144365 (equal contribution)
• Deepa KG, P C Ramamurthy, M. K. Singha “Mesoporous Cu2ZnSnS4 nanoparticle film as a flexible and reusable visible light photocatalyst” Optical Materials, Vol 98, 109492, Dec 2019
• M. K. Singha*, A. Patra “Highly Efficient and Reusable ZnO Microflower Photocatalyst on Stainless Steel Mesh under UV-Vis and Natural Sunlight”, Optical materials, Vol 107, Sept. 2020, 110000 (corresponding Author)
• S. Rahaman, M. K. Singha* M. A. Sunil, and K. Ghosh “Effect of Copper concentration on CTS thin films for solar cell absorber and photocatalysis application”, Superlattices and Microstructures, Vol 145, Sept. 2020, 106589 (corresponding Author)
• M. K. Singha*, A. Patra, V. Rojwal and Deepa K G “Single Step Fabrication of ZnO Microflower Thin Films for Highly Efficient and Reusable Photocatalytic Activity”, Journal of Materials Science: Materials in Electronics, Vol 31, 13578–13587, 2020. (corresponding Author)
• V. Rojwal, M. K. Singha, T. K. Mondal, Amorphous Silicon and Carbon Nanotubes Layered Thin-film Based Device for Temperature Sensing Application, IEEE SENSORS JOURNAL, Vol. 21, No 3, 2021,pp 2627-2633.
• L. L. Rajeswara Rao, M. K. Singha, K. M. Subramaniam, S. Asokan “Optimization of low resistivity molybdenum thin Films for high-temperature microheater applications” Superlattices and Microstrucrures, Vol. 156, August 2021, 106971
• P. Dwivedi, A. K. Sarkar, C. Chakraborty, M. Singha & V. Rojwal, "Application of Artificial Intelligence on Post Pandemic Situation and Lesson Learn for Future Prospects", Journal of Experimental & Theoretical Artificial Intelligence, 2021, https://doi.org/10.1080/0952813X.2021.1958063
• S. Rahaman, M. K. Singha* “Nanoarchitectonics of Earth-Abundant Chalcogenide Cu2SnS3 Thin Film Using Ultrasonic Spray Pyrolysis for Visible Light-Driven Photocatalysis” , Applied Physics A, Vol. 128, Jan. 2022, 36, (corresponding Author)
• S. Rahaman, M. A. Sunil, M. K. Singha and K. Ghosh “Optimization and Fabrication of Low cost Cu2SnS3/ZnS Thin Film Heterojunction Solar Cell using Ultrasonic Spray Pyrolysis” Optical Materials, Vol. 123, January 2022, 111838 (corresponding Author)

Conference Papers

• M. K. Singha, N. Jampana“Design simulation and fabrication of 3D electrode for dielectrophoretic chip” 2nd International Symposium on Physics and Technology of Sensors, 8-10th March, 2015, Pune, India
• M. K. Singha, N. Jampana“Design simulation and fabrication of 3D electrode for dielectrophoretic chip” 2nd International Symposium on Physics and Technology of Sensors, 8-10th March, 2015, Pune, India
• M. K. Singha*, and Deepa K G “Band Gap Tailoring and Raman Studies of Mn Doped ZnO Thin Film Deposited by Ultrasonic Spray Pyrolysis” Chapter No 83, pp 535-540, The Physics of Semiconductor Devices: Proceedings of IWPSD 2017.
• M. K. Singha*, A. Patra, V. Rojwal, D. Kumar and Deepa K G“Ultrasonic spray pyrolysis deposited ZnO thin film for photocatalytic activity” 3rd International Conference on Optoelectronic and Nano Materials for Advanced Technology (icONMAT 2019), Kochi, India, 3-5th January, 2019
• M. K. Singha*, A. Patra “Effect of ZnO on stainless steel electrode for piezeoelectric Application”, IEEE SAS 2019, Sophia Antipolis, France, 11-13th March, 2019.
• S. Rahaman, M. A. Sunil, M. K. Singha and K. Ghosh “Studies of ultrasonically sprayed Cu2SnS3 thin films by varying Sn concentration”, 5NANO2020, Kottayam, India, 23-24 July, 2020, Materials Today proceedings, Vol. 43, Part 6, 2021, pp 3938-3941.
• S. Rahaman, M. A. Sunil, M. K. Singha, K. Ghosh “Ultrasonic spray pyrolysis deposited CTS thin film:Variation of thiourea concentration in the film”, Materials today Proceedings, https://doi.org/10.1016/j.matpr.2021.04.513
• Nagajyoti V. Monoj Singha, et. al, Optimization and Efficiency improvement of Lead Free Perovskite (CH3NH3SnI3) solar cells with CuSbS2 as HTL: Modeling and Numerical study, EPIC conference 2022, 15-17th December 2022, SRM University AP

Book Chapters

• M. K. Singha, V. Rojwal “Spray Pyrolysis: Thin film deposition technique for Micro sensors and devices ” Advancements in Instrumentation and Control in Applied System Applications, IGI Global, chapter 11, pp 178-202, 2020.
• P. Dwivedi, M. K. Singha, “IoT Based Wearable Healthcare System: Post COVID-19” The Impact of the COVID-19 Pandemic on Green Societies, Springer, Book Chapter No 13, pp 305-320.
• M. K. Singha, P. Dwivedi, G. Sankhe, A. Patra, V. Rojwal “Role of Sensors, Devices and Technology for Detection of COVID-19 Virus” Efficient Data Handling for MassiveInternet of Medical Things Healthcare Data Analytics, Springer, Book Chapter No 13, pp 295-314.

PATENTS

• Dr. Manoj Kumar Singha has filed 1 patent on “Method of preparing Silver-Zinc oxide marigold structure on flexible structure”.